Verbrauchsmaterialien für ECMO-Pumpen und Membranoxygenatoren

Leistungen nach Losen (3)

• LOT-0001 · Consumable, centrifugal pump head with tubing for ECMO machine and oxygenators for ECMO machine.

  Consumable, centrifugal pump head with tubing for ECMO machine and oxygenators for ECMO machine.

  Frist: 23.11.2026, 01:00 (Europe/Berlin)

• LOT-0002 · Membrane oxygenator specifically designed for long-term ECMO-ECLS applications, for use for up to 15 days, made of polymethylpentene (PMP), with a pore size of 40 µm (±5%), blood flow range of 1–8 L/min, static priming volume of 295 mL, heat exchange surface area of 0.38 m² (±5%), gas exchange surface area of 2.47 m² (±5%), 3/8" barbed blood inlet and outlet ports, 1/4" gas inlet port, and 3/8" Ha

  Membrane oxygenator specifically designed for long-term ECMO-ECLS applications, for use for up to 15 days, made of polymethylpentene (PMP), with a pore size of 40 µm (±5%), blood flow range of 1–8 L/min, static priming volume of 295 mL, heat exchange surface area of 0.38 m² (±5%), gas exchange surface area of 2.47 m² (±5%), 3/8" barbed blood inlet and outlet ports, 1/4" gas inlet port, and 3/8" Hansen water inlet and outlet ports.

  Frist: 23.11.2026, 01:00 (Europe/Berlin)

• LOT-0003 · Consumable for an acute circulatory support system – pump with full Maglev flow technology, with components made of polycarbonate, with a priming volume of 31 mL (±5%). Maximum flow rate 9.9 L/min (±5%), 3/8" connector, with a maximum operating pressure of 600 mmHg, including a tubing set: inlet tubing, 200 cm (±5%), 3/8" × 3/32" PVC, with blue marking, and outlet tubing, 200 cm (±5%), 3/8" × 3/32

  Consumable for an acute circulatory support system – pump with full Maglev flow technology, with components made of polycarbonate, with a priming volume of 31 mL (±5%). Maximum flow rate 9.9 L/min (±5%), 3/8" connector, with a maximum operating pressure of 600 mmHg, including a tubing set: inlet tubing, 200 cm (±5%), 3/8" × 3/32" PVC, with blue marking, and outlet tubing, 200 cm (±5%), 3/8" × 3/32" PVC, with red marking, with an 860 mL reservoir bag, fitted with a spike and clamp, connected via 1/4" and 1/16" PVC filling tubing.

  Frist: 23.11.2026, 01:00 (Europe/Berlin)